Equipment Grab

So, Dad called me out of the blue yesterday. I'm at the fire department's surplus sale, he says, and asks what I might need, and describes some of the stuff lying around. And the prices. Dirt cheap prices!!

He cleaned up, and sounds like he had more fun than even I would have had. He only found out about the sale the day before, not enough time for me to arrange to be there myself.

Long story short, through the silent-bid process he secured the following for Engine 17:

A ground base for securing a deluge monitor.

A 2.5" siamese.

A 2.5" threaded to 3" Storz elbow.

A triple 2.5" inlet deluge monitor. $150!

Twenty-one lengths of miscellaneous hose. Some are knotted (damaged or unfit for use) but this stuff is mainly for decoration, so it is perfect. $5/roll!

Three lengths hard suction, $15 each (only have room for two, so the odd one is up for re-sale at cost). Three ladders, also $15 each. I would have liked a roof ladder and an extension ladder, but I'm not complaining, since E17 presently has zero ladders.

They also have numerous sets of older used turnouts for sale, but without the proper credentials (active FF and note from your agency to prove it) you can't buy them on the spot. I can arrange the credentials easy, so if the price is right I might grab 2-4 sets for costume use when I have riders in a parade of some such.

Score! Thanks Dad!

Also have a neighbor who is thinking about loaning 17 for standby duty while he does some logging nearby. Depending on cost, we may arrange for him to repair 17's tank-to-pump leak and pneumatic pump shift actuator - making it pump capable for his needs - as payment. We shall see.

Summer is pretty much here. Fingers crossed for progress.

Summer is here

Engine 17 has been out three times in the past couple of weeks, running short errands to get the winter crud blown out, and ferrying kids to various events where they delighted in the splash of showing up or disembarking in a fire engine.

Too much fun!

Anyway, this post serves to let you know we're still here. Hoping to get a few things done in the coming weeks and months of good weather. Stay tuned.

Wearing a Fire Engine Disguise

I took my daughter to the high school playoff football game, so she could hang out with her friends. I dropped her off in our little car. The lot was beyond full when we arrived, and the entrance was barricaded. I pulled up alongside the barricades, completely outside of any moving traffic, to let her out. She was rummaging for something for a minute, and a school security person walked over and rapped on my window, telling me to move along.

Now maybe there was a legitimate reason I couldn't be there, but I haven't thought of it yet. I was still in the driver's seat, she was getting out, the car was running, lights on, not remotely appearing that I might be thinking of parking there. But OK, no problem, she grabbed her stuff and I left.

Near the end of the game, she called to tell us she was almost ready to be picked up. I heard her friends chattering, and offered to bring 17 down to pick her up and take some of her friends home. She was all aboard for that plan.

I had completely forgotten about the barricades and security people by the time I arrived, but just as I approached and saw them, trying to figure out where to park, they saw me and just automatically grabbed the barricades, moving them out of the way and waving me through.

Well, OK then!

So I picked up my kid and several of her friends right at the ticket gate. It made quite a scene, not unlike when I picked my boys up after school one day.

Picking your kid up in a fire engine and also taking some of her friends home raises her stock, as well as your own in her eyes and those of her friends, especially the guys. For real? Your dad owns a fire truck? Big fun was had by all, especially since the home team won big.

I promise I wasn't trying to play the traffic folks, really, but that was just too funny to not share.

The Ripening of Squad 6

One of the biggest tasks in the Engine 17 project is getting her painted red again, or "ripened", from the lime-yellow coat she currently wears.

While that major task awaits, the other unit at my place was successfully ripened today.

As a result of a consolidation of fire protection agencies, the older apparatus in the district still bore markings from the two previous agencies that came together to form a new one. Squad 6 was one of them.


In every other case, the contractor was able to simply remove the old markings and apply new ones, in some cases extending a white stripe on the door with stock decal material. Squad 6 was the only unit, in the 22-vehicle fleet of various colors, that was white with a painted lime-yellow stripe, and the contractor had no stock lime-yellow that would match.

Solution? Cover the entire stripe with a new color. Hey, how about red?

She looks nice with her new stripe, doesn't she?

Welcome, PNW SPAAMFA members

I got my periodic SPAAMFA PNW newsletter the other day, sat down with the pile of mail to peruse through it.

There, on the second page, with no advance warning, was a couple of paragraphs about Engine 17, her history, and how she came to be in my possession.

I didn't write it. I don't know who did, but they seem to know a lot about me. Oh wait, I think I've about spilled my soul right here in this blog. I'm a bit crazy and I own my own fire engine. What else is there?

What's new? Well, 17 has been given a clean bill of health following a detailed inspection. A few air lines need to be moved so they don't rub, but otherwise she is in remarkably great condition, mechanically. Also found some vintage (heavy!) 2.5" hose sections that are loaded so she isn't quite as naked. Love the classic brass couplings.

That's really all there is for now. If you came here from the SPAAMFA newsletter, nice to see you here. Things will be slow over the winter unless I get some historical stuff to talk about. Otherwise, the project is going into hibernation until Spring. Stay tuned.

Parade Report

When we left off, I was trying to install the Whelen Commander strobe light and found things not exactly in a plug-and-play configuration.

The very next day the job was completed, with help from my very-helpful six year old. Seriously, this is no joke. He was a huge help, holding hardware in the right place for me on the roof while I fiddled with bolts and ratchets down in the cab. Plus, his random stories about unrelated topics diverted my attention from irritating but uninteresting problems that cropped up here and there.

Here he is on the cab roof, making sure we know where the new base is installed. You can see the dirty ring in front of the new base that shows where the previous light was installed, forward of the original beacon placement when 17 was new.


A couple of days later, 17 was patiently hanging out at my fire department's Station 1, out of the way, waiting for parade day. May I take you for a trip down Memory Lane, regarding the First Krang? On the day of the Krang, 17 was parked on this side of the building like this, but pulled all the way up by the yellow bollard guarding the corner of the building. Yes, that's the one I clipped. Embarrassing. Not at all a coincidence that she was parked so far back this time, either.


Finally, parade day! 17's role in this parade, besides being a, well.... a fire engine in a parade.... was to be the entry accompanying the New Blue Parrot drama troupe as they promoted their upcoming show Thoroughly Modern Millie. If you bother to ask if I play a Chinese laborer in this show, whose lines are pretty much all in genuine Chinese, I may or may not comment.

Unsurprisingly, there were other apparatus in the show. I was impressed with the work done to this old pumper by the Shriners, as can be evidenced by the weathered photograph on display showing how it looked when they started on it. It isn't at all faithful as a true restoration, but I can respect the amount of effort.



Another lime-yellow pumper was in the show, one I had not known about from this area. The driver, however, was merely a hired hand with no special interest, and the rig itself was borrowed or rented from its owner to ferry a political candidate.


I tried to make small talk and ask about their rig, sort of expecting some of the same in return, but they were totally disinterested. To them, the pumper may as well have been a rented Corvette of no special significance. Thankfully, though we started out parked side-by-side, we were far apart in the procession.

Here we are perhaps twenty minutes before the start, still setting up banners and other attachments for the run.


About to get underway. I don't remember what I was irritated about, but it probably had something to do with telling people to sit down for the umpteenth time. Whatever, it didn't last. Irritation doesn't last long when you get to drive your own fire engine in a parade.


And thanks for suffering this long post to see a picture of 17 in the parade, Millie cast members strolling along in front. It was a great day.


The one thing sorely missed? That missing Federal Q2B.... just gotta get my hands on one.

First Parade Detail Coming Up

Ready or not, the date is coming up fast.

The rotating roof light on 17 usually does not rotate, and it would be rather embarrassing for that to happen in a parade. Therefore, I decided to not wait to put the "new" strobe light up before the rig is painted, because who knows how long we'll wait for that.

I removed a bunch of screws from the aluminum strips that hold the interior roof panels in place, and removed the center panel, exposing the nuts that held the roof light in place. Removing it was not much of a chore at all.

It was not until I brought the original equipment Whelen strobe out that I realized that this was not going to be so simple. In the picture below, with the dome removed, you can see the Fresnel lens strobe unit resting on the base. The lens and strobe components underneath are held down by the clamp ring, along with the dome, when installed, but as shown below they just lift right off of the base. So for installation, all you have to do is secure the base, and then you tie everything down to that. Simple.



It was not until I had exposed the underside of the old light's installation that I realized it was mounted in a different location than the strobe had been. Reviewing old photos of sister rigs, along with considering the evidence of old holes visible from under the roof, I confirmed that the original strobe was mounted roughly in the front/back center of the cab roof. The newer light had been placed closer to the front.

OK, no problem. A little sealer, some new holes, we're good.

Then I looked at the Whelen base. It has three tabs spot-welded to the inside, about halfway up (not along the bottom edge). And there were only two holes in the original installation.

Fabricating something to make this work, or simply using long bolts, will not be a problem. But the two holes on the roof and three inside the base are not plug and play compatible, so I couldn't finish the job with equipment on hand. Probably will just go with three long bolts.

Here's a picture before the old "new" light was removed, and a picture of where the new "old" light will go that I snapped after realizing I couldn't get the job done that day. Until I cobble something together, poor Engine 17 is feeling a little naked without a roof warning light at the moment.



It isn't much, but some work is getting done at last.